Neuro-Lyme.com

Chronic Neurological Lyme Disease

 

The Original Rife Machine

THE NEW BCX ULTRA

BCX Ultra Rife Machine for Lyme disease

ADVANCED RADIO FREQUENCY TECHNOLOGY

20YEARS of FREQUENCY TECHNOLOGY Design and Development

The BCX ULTRA is our finest Instrument to date, offering many extraordinary features.The ULTRA has Radio Frequency (RF) in both glass tubes and electrodes that you can use simultaneously. The ray tubes produce a higher voltage while the electrodes produce a higher current.

This combination produces even better results in your research on killing unwanted microbes.

The greatest breakthrough in all our manufacturing years has been the spike wave. A close second is utilizing the RF carrier wave. All of our other features have been added to optimize to a fuller extent these 2 great pillars in devitalizing dangerous microbes.

The BCX ULTRA offers many features other frequency devices do not. Dr. Rife used Ray tubes and so do we.

Our hand held ray tubes are one very important feature allowing you to put the frequencies right where they are needed for maximum benefits.

Dr. Rife stated, “ Now the spikes that you see on the frequencies are the lethal part that kill and devitalize the virus.  They are the resonant peaks of the frequencies which increase the voltage to a very high potential which the cells of the virus wall can not tolerate and they break up into many pieces and are destroyed.”

This statement is according to John Crane who worked with Dr. Royal Rife.

waves available for BCX Ultra Rife Machine

WAVE FORMS: You can use square wave for killing pathogens and can use sine wave for regeneration and healing.

The Ultra has many other wave forms to choose from for experimentation.

CARRIER WAVES: The Ultra has a basic carrier wave that is preset at about 45,000 Hz for the glass tubes. The carrier waves to choose from for the rest of the electrodes 1Hz to 4.00 MHz (4,000,000 Hz).

The Ultra has a carrier frequency that penetrates deeper and farther. It has been shown in scientific studies on bioelectric impedance analysis in the body that audio frequencies will enter the body but only travel in the connective tissue around cells.

Studies also show the closer to 1 megahertz the greater the penetration into the cells. Because of this Dr. Rife always used a carrier frequency in the MGz range so the frequency could enter the body and cells where the microbes are located.

The BCX ULTRA has the ability to produce a 1 megahertz carrier frequency for better penetration deep into cells where the microbes live.

We have exciting multiple wave forms to choose from:

  • Squarewave
  • Sinewave
  • Trapezoid
  • Triangle
  • Linear
  • RampUp Linear
  • RampDown
  • Exponential
  • RampUp
  • Exponential
  • RampDown
  • Odd
  • Harmonics
  • Even
  • Harmonics
  • Pulse Width
  • Modulation
  • Custom

MODULATED WAVE FORMS with the ULTRA you can Select Modulation in the case of electricity, power is determined by multiplying two factors: volts and amps. The waveform of the volts and amps determines its power in relation to its peak.

The Ultra references to peak. This is why square waves have greater power density than sine waves or triangle wave...GATING OR ENTRAINMENT is what we used to call pulse on our previous machine. THE ULTRA uses 3.5 Hz as a default. Abrams, who worked with Rife, used 3.5-4 Hz for gating.

Gating is another form of modulation. The Ultra modulates 2 frequencies when it plays an audio frequency with a Radio carrier frequency. In other words, the audio frequency is piggy backed onto a higher frequency. While this is happening, the Ultra introduces a 3.5 Hz gating which causes the tubes to blink as you run the frequencies.

Entrainment (gating) is defined as the tendency of two oscillating bodies to phase together so that they vibrate in harmony. This principle of entrainment is universal in nature. By using the pulse (gating) you avoid the microbes adjusting to the frequency so they can be eliminated better.

This technology is not intended to prevent, diagnosis, treat or cure any disease or condition. We make no claims, either stated or implied. If you are in ill health, see your healthcare professional.

This device is for personal experimental research purposes only.

B C X - U L T R A

COMPARISON

BCX Ultra vs. Most “Rife type” devices

(for Comparison GB4000 click here)

Attribute Most Rife type

devices

BCX Ultra

Outputs all Rife's

original high Radio

Frequency (RF)

frequencies

No-

Electrical Only

Yes

RF Carrier Mostly none Yes

Simultaneous RF

frequencies

0 3 pre-programmed

Infinite with custom waveforms

Outputs simultaneous

audio

frequencies

2 3 pre-programmed

Infinite with custom waveforms

Single audio frequency Yes Yes

Ray tube No- Yes

Ray tube harmonics No-

No Ray Tube

Yes-

Up to 20MHz electrical plus

infra-red, electromagnet,

electrostatic, light spectrum

Frequency range 10,000Hz.most

devices

4 MegaHz

Infinite with custom waveforms

NOTE: No need to run above 4MHz, No

Rife Frequencies used above 3MHz

Analog frequencies Yes Yes

50% Duty Cycle Yes Yes

10 - 90% Duty cycle Yes Yes-

Is actually 1 - 99% Duty Cycle

Square Wave

Sine Wave

Hoyland Wave

Pulse Modulated Wave

Triangle Wave

Trapezoid

Exponential RampUp Wave

Exponential RampDown Wave

Yes

No

No

No

No

No

No

No

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Linear RampUp Wave

Linear RampDown Wave

Odd Order Harmonic Wave

Even Order Harmonic Wave

Custom Waves

No

No

No

No

No

Yes

Yes

Yes

Yes

Yes

Power level (approximate) 10 watts

with Opt. SR-4

18 watts standard, 83 watts to

412 watts (plasma/e-field beam

tube delivery,)

Conductive power limited to

safe levels

Pre-Programmed auto

channels

Yes Yes

Programmable channels No Yes

Gating features Some Yes

Frequency sweeps Yes Yes-

Custom Modulation

Converge sweeps Sometimes Yes

Custom Modulation

Displays actual

frequencies

Sometimes Yes

A summary of weaknesses in many common in so called “RIFE Machines”.. Please understand to

the best of our current knowledge NO ONE makes & sells “Original Rife” equipment or machines

contrary to the many claims being made.

· Complicated and confusing to program & use

· Keyboard works poorly- hard to press, double entries

· Many have software and hardware problems

· No way to re-run a program unless stored to memory

· Time not programmable into program

· Poor electrical performance

· Problems with multiple run frequencies

· Poor Square wave waveform resulting in bad harmonic performance

· Unbalanced output resulting in un-symmetrical delivered power

The premise of many so called “RIFE” machines is their claim that they can directly generate

the highest Rife frequencies electrically through conduction rather than by means of a ray

tube. Although they can generate the frequencies conductively, their system does NOT deliver

the same types of energies. Ray tubes deliver a broad spectrum of energies, ranging from

infrared, to electromagnetic fields, to electrostatic fields, to conductive electron flow

(plain old electricity), to light in the visible spectrum and beyond. The only energy most

“Rife machines” deliver is plain old electricity.

Although the manufacturers of “Rife type” devices attempt to argue otherwise, it is

categorically true that “Skin Effect” prevents high frequency electron flow (plain old

electricity) from penetrating deeply into ANY electrically conductive material. The higher

the frequency, the shallower the penetration. At frequencies above 1MHz, skin effect will

limit penetration to a fraction of an inch.

A serious problem with many so called “ RIFE” machines is poor Square wave signal quality. A

Square wave generates a predictable series of odd order harmonic frequencies with an accurate

energy balance. The closer the Square wave is to perfect, the more accurate the harmonics

are. Low Rise and fall time is the most difficult element to achieve in a Square wave. A

perfect Square wave has a rise time of zero, so the lower the rise and fall is, the better

the Square wave and thus the harmonics are.

BCX Ultra: 150nsec from 1 to 4MHz

BCX Ultra vs. GB4000 COMPARISON

(**new updated chart coming soon for MOPA)

GB4000

(Freq Generator)

BCX Ultra

Outputs all Rife's

original high Radio

Frequency (RF)

frequencies

Yes-

Electrical Only

Yes-

Electrical, Ray Tubes, Beam Tubes

RF Carrier Yes Yes & through Ray Tubes

Simultaneous RF

frequencies

3 3 pre-programmed

Infinite with custom waveforms

Outputs simultaneous

audio

frequencies

8 3 pre-programmed

Infinite with custom waveforms

Single audio frequency Yes Yes

Ray tube No- Yes

Ray tube harmonics No-

No Ray Tube

Yes-

Up to 20MHz electrical plus infra-red,

electromagnet, electrostatic, light spectrum

Frequency range 20MHz 4 MHz (Electrical, Ray Tubes, New

Beam Tubes)

Infinite with custom waveforms

NOTE: No need to run above 4MHz, No

Rife Frequencies used above 3MHz

Analog frequencies Yes Yes

50% Duty Cycle Yes Yes

10 - 90% Duty Cycle Yes Yes-

Is actually 1 - 99% Duty Cycle

Square Wave

Sine Wave

Hoyland Wave

Square Pulse Width Wave

(Pulse Modulated Wave)

Triangle Wave

Trapezoid

Yes

Yes

No

No

No

No

Yes

Yes

Yes

Yes

Yes

Yes

Exponential RampUp Wave

Exponential RampDown

Wave

Linear RampUp Wave

Linear RampDown Wave

Odd Order Harmonic Wave

Even Order Harmonic Wave

Custom Waves

No

No

No

No

No

No

No

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Power level

(approximate)

10 watts

with Opt.

SR-4

18 watts standard, 83 watts to

412 watts (plasma/e-field beam

tube delivery)

Conductive power limited to safe

levels

Pre-Programmed auto

channels

Yes Yes

Programmable channels Yes Yes

Gating features Yes Yes

Frequency sweeps Yes Yes-

Custom Modulation

Converge sweeps Yes Yes

Custom Modulation

Displays actual

frequencies

Yes Yes

Rife devices that directly generate the highest Rife frequencies electrically through conduction (ie metal apparatuses) rather than

by means of a ray tube can generate the frequencies conductively, however their systems do NOT deliver the same types of

energies. BCX Ultra Ray tubes deliver a broad spectrum of energies, ranging from infrared, to electromagnetic fields, to

electrostatic fields, to conductive electron flow (electricity), to light in the visible spectrum and beyond. The “Skin Effect” prevents

high frequency electron flow (electricity) from penetrating deeply into ANY electrically conductive material. The higher the

frequency, the shallower the penetration. At frequencies above 1MHz, skin effect will limit penetration to a fraction of an inch.

(refer to http://en.wikipedia.org/wiki/Skin_effect)

About Custom Waveforms and Custom Modulation:

A fundamental difference between the BCX Ultra and the GB4000 is the way that they generate waveforms. The GB4000 uses a

DSP (digital synthesizing processor) which, by nature, is only capable of generating digital Squarewaves. By using filtering

techniques, the circuit is capable of approximating a Sinewave by “rounding off” the Squarewave.

The BCX Ultra uses entirely different electronics. It contains 3 separate Microprocessors each of which creates an “Arbitrary

Waveform”. Arbitrary Waveforms are exact and pure creations of naturally occurring and incidentally occurring waveforms.

Examples of naturally occurring waveforms are Sine, Square, Triangle, Exponential, and Linear. An example of an incidentally

occurring waveform is the Hoyland Waveform. The BCX Ultra faithfully reproduces the waveform that Hoyland generated using a

complex array of apparatus. If fact, the Hoyland Waveform in the Ultra was created by digitizing an actual copy of Hoyland’s test

data. Another example of Arbitrary Waveforms are the Ultra’s Odd Order Harmonic and Even Order Harmonics waveforms. The

Odd Order Harmonic Waveform produces a fundamental, and the 3’rd, 5’th, and 7’th harmonics is perfect harmonic proportion.

The Even Order Harmonic Waveform produces a fundamental, and the 2’nd, 4’th, and 6’th harmonics in perfect harmonic

proportion.

With Arbitrary Waveforms, the Ultra can produce ANY waveform imaginable- accurately, and perfectly. Harmonics can only be

generated accurately and correctly if the fundamental waveform is accurate.

The BCX Ultra contains 3 Arbitrary Waveform generators, which when combined together can produce an un-imaginable

combination.

Square Pulse Width Wave:

We are the only manufacturer that has a Square Pulse Width Wave (a modified square wave) which we found over time better

results than a standard Square Wave. Square Pulse Width is a modified Square Wave that starts from zero and goes to 100% in

about 2 seconds. The Square Pulse Width Wave builds up a charge that explodes and kills off more microbes then the standard

Square Wave.

WHY WE USE 'BCX ULTRA' RAY TUBES

The Importance Of Using Ray Tubes In Rife Frequency Research

1. Royal R. Rife always used ray tubes with his frequency devices.

2. The BCX Ultra Hand Held Ray Tubes complete the circuit by running through the body between the Ray

Tubes held in each hand, thus guaranteeing that the frequencies flow through the entire subject.

3. The Ray Tubes produce a much higher voltage than pad devices and push the frequencies far deeper into the

research subject.

4. There is also the Magnetic Effect produced by gas-filled Ray Tubes (this can be tested) that especially - when

used in conjunction with the radio frequencies (RF) - penetrates thoroughly into the subject.

6. Most people prefer the "soft" "energetic" "warm" feel of the glass tubes compared to the electrical bite felt

from the stainless steel metal electrodes.

7. Many people report that the glass Ray Tubes 'glow and flow' has a relaxing calming, softening effect on their

body.

TECHNICAL SPECS: for detailed information click here

WHY WE USE LED WANDS

L.E.D.’s

Our L.E.D.’s are now available in three colors: red, green and blue. They can be

applied in a variety of ways including: on the eyes, in the navel, and on the skin.

Application on the eyes

The green and red L.E.D.’s are applied alternately (green one day, red the next day, then green the

following day, etc.). Hold the L.E.D. 1/4th inch away from an open eye, or directly on the lid of a

closed eye. Start with 1 minute per frequency for each eye, working up to 5 minutes per frequency for

each eye. This can be done twice a day.

Application in the navel

Red L.E.D.’s are applied directly in the navel to stimulate regeneration, for tonification and blood

cleansing.

Application on the skin

Green L.E.D.’s are applied directly on the affected area of the skin for mutated cells and tumors. They

can also be applied on acupuncture points.

Blue L.E.D.’s are used for SARS, and are applied directly on the affected area.

FREQUENCIES for L.E.D.’s

All frequencies are applicable for use with L.E.D.’s.

**Brain cell/tissue repair…………………………………………………2128

Endorphin Stimulation for pain relief and relaxation…………………..2.5

Eyesight, to improve…………………………………… see frequency manual

*Mutated cells, to shrink abnormal growth……..……………………… 17024

Pain and inflammation, irritation………………………………………….1, 123

Seratonin stimulation for pain relief…………………………………….2.5+80

Tissue repair………………………………………………………………..266

* This frequency is to be used 3 minutes in combination with 1

Hz. for 7 minutes, and 266 Hz. for 5 minutes.

** This frequency is to be used 3 minutes in combination with 1

Hz. for 7 minutes, and 123 Hz. for 5 minutes.

TECHNICAL SPECS: for detailed information click here

WHY WE USE 'BCX ULTRA' VORTEX

Our stand alone beam tube - the VORTEX. The number one reason for producing

the Vortex is for people who simply want a standalone tube because Rife had one.

Others have asked us for a standalone to run while they are working, sleeping or

just to be hands free.

The Vortex certainly does not take the place of the hand

held Ray Tubes that we are well known for. The Ray Tubes

complete the circuit through the body forcing all the

energy through your body being more effective.

For some time we had planned on doing what Rife did with

the phanatron tube. His tube was in the 50 watt range

and it was used for specific areas of the body. It would

either touch the body or be held just off the body. The

tube was used to pan the area of a tumor for an example.

Vortex vs Phanatron Tube: The Vortex tube is directional

to concentrate the energy more in one spot while the

Phanatron Tube is more all directional. The Phanatron

Tube is made with quartz glass which allows the UV to go

through. Our engineer didn't want us to take the risk of

someone damaging their eyes with too much UV so we opted

to go with the vortex tube for these 2 reasons:1) It is

more for specific areas and not full body like the Ray

Tubes & 2) your hand or arm can be put into the vortex

tube.

TECHNICAL SPECS: for detailed information click here

BCX ULTRA TECHNICAL SPECIFICATIONS

The BCX Ultra has been completely upgraded and improved making the BCX Ultra the most advanced Instrument in its

field. The BCX Ultra now has more power and greater harmonic resonance and includes all the same accessories as its

predessors (BCX 211/BCX 411). The improved BCX Ultra technology is a more compact design, that can be take

anywhere.

Physical Dimensions: 11.0" x 8.0" x 3.0", 2.5 lbs

Power supply: Input: 100-240VAC, 50-60Hz, 1.2A. Output: 24VDC @ 2.0A. 5.5" x 2.5" x 1.5", 1 lb plus cords

Controls & Indicators:

· Input (1): jack for Power Input (DC power plug, 2.5mm, center positive)

· Outputs (5): jacks for Electrodes (2 pairs), Ray Tubes, LED Wand

External:

Input/Output: jack for Computer (USB Type B)

Input/Output: Controls: 8- momentary pushbuttons for Power On/Off, Start/Pause, Stop, Change +, OK/,

Change -, Back"

Indicators: 5- Green LED 16 character alphanumeric display, LED indicators for Ray Tubes, Electrodes, LED

Wand, and Operating.

Functions:

· View Built in Instructions

· Run a Pre Built-In Program: Scroll or select from either Factory Created name or number, both of

which are displayed on the screen.

· Run a Custom User Program: Scroll or select from either User Created name or number, both of

which are displayed on the screen (up to 45 frequencies per program!)

· Create, Edit, Save, Run a User program

· View a Program

· Copy a Program to another User program location

· Erase a User program

· Computer Control

Capabilities:

· Factory Pre-programs 1424

· User Custom programs: 256

· Output frequencies simultaneously: 1 (Single) or 2 (Dual) - Sequence Frequencies per Pre-program or

User program: 80 single frequency, or 40 dual frequencies

Variables for each Program (Changeable):

· Number: 4 digits

· Name: 8 Alphanumeric Characters

· Output Type: Select from 7 types - *Electrodes, *Raytubes, *LED Wand, *Auxiliary, *Electrodes

Raytubes simultaneously, *Electrodes & LED Wand simultaneously, *Electrodes & Auxiliary

simultaneously

· Duty Cycle: 1 to 100%

· Duty Cycle Pulse: Waveform type: Select from 15 types Range: 1 to 10,000 Hz, *Resolution: 1.00000

through 9.99999 Hz (0.00001 Hz steps), 10.0000 through 99.9999 Hz (0.0001 Hz steps), 100.000

through 999.999 Hz (0.001 Hz steps), 1,000.00 through 9,999.99 Hz (0.01 Hz steps), 10,000.0 through

99,999.9 Hz (0.1 Hz steps), 0.1000 through 4.0000 Mhz (0.0001 Mhz steps)

· Electrode Intensity: 1 to 100%

· Raytube Intensity: 1 to 100%

· LED Wand Intensity: 1 to 100%

· Auxiliary Intensity: 1 to 100%

· Run Time: 1 to 120 minutes

· Soft Start/Stop: Yes or No

· Automatic Shutoff: Yes or No

· Frequencies: Single (Frequency A only) or Dual (Frequency A & B simultaneously) -

· Frequency A: Waveform type: Select from 15 types (Mhz frequencies- Square only)

· Range: 1 to 4.00 MHz *Resolution: 1.00000 through 9.99999 Hz (0.00001 Hz steps), 10.0000 through

99.9999 Hz (0.0001 Hz steps), 100.000 through 999.999 Hz (0.001 Hz steps), 1,000.00 through

9,999.99 Hz (0.01 Hz steps), 10,000.0 through 99,999.9 Hz (0.1 Hz steps), 0.1000 through 4.0000 Mhz

(0.0001 Mhz steps)

· Frequency B: Waveform type: Select from 15 types

· Range: 1 to 4.00 MHz, *Resolution: 1.00000 through 9.99999 Hz (0.00001 Hz steps), 10.0000 through

99.9999 Hz (0.0001 Hz steps), 100.000 through 999.999 Hz (0.001 Hz steps), 1,000.00 through

9,999.99 Hz (0.01 Hz steps), 10,000.0 through 99,999.9 Hz (0.1 Hz steps), 0.1000 through 4.0000 Mhz

(0.0001 Mhz steps)

· Sequence: Up to 80 single frequencies for Single, or up to 40 dual frequency pairs for Dual

Waveform Types: (Wide Range to choose from)

Square Wave

** Square Wave Pulse (proprietary wave)

Sine

Trapezoid

Triangle

Linear Ramp Up

Linear Ramp Down

Exponential Ramp Up

Exponential Ramp Down

Odd Order Harmonics

Even Order Harmonics

Custom 1

Custom 2

Custom 3

Custom 4

ELECTROTHERAPY DEVICE – DISCLAIMER:

The BCX Ultra Plasma Frequency Instrument is not approved by the F.D.A. as a Medical Device. They are

experimental electronic instruments. They are not intended for the diagnosis, prevention, treatment, cure or

mitigation of any disease in humans. They are not designed to affect the structure or function of any system in

the body. If you have a health-related condition that requires medical attention, always consult with a licensed

health care professional. NOTE: You should realize though, that you do have LEGAL Rights to self-medicate

under the 9th Amendment of the United States Constitution.

PRECAUTIONS:

· DO NOT use ANY Electrotherapy Device, if you have a Cardiac Pacemaker or Internal Defibrillator.

· DO NOT use ANY Electrotherapy Device, if you are a Pregnant Woman, have Heart Disease, are

driving or are using HAZARDOUS Machinery.

· These Devices should also be kept out of reach of Children.

· DO NOT place Electrode Pads over Skin Lesions, Abrasions, NEW Scars, Cuts, Eruptions, or Sunburn.

· DO NOT advance Output Amplitude to UNCOMFORTABLE Levels.

· DO NOT fall asleep, while using. * If you feel Sluggish, Faint, Dizzy, Headachy, Nauseous, or have

Flu-like Symptoms after Exposures, REDUCE Number of Pulses per Session and/or SHORTEN

Session Times.

· Use CAUTION, if you have IMPAIRED Kidney or Liver Function.

· Use CAUTION, if you have Metal Implant. Someone, although rare, may feel a sensation where the

metal implant is located. However, they opt to run the freqs because the sensation is less bothersome

than the problem.

SPECS for BCX ULTRA PHOTON & E-FIELD BEAM TUBES

BCX Ultra Raytubes (handheld tubes)

Operate at a 100,000Hz carrier frequency

Can be modulated 1 to 100,000Hz with any wave form (square, sine, etc.)

Variable Intensity

Power: 30 watts maximum

Availability: Stock

Cost: free w BCX Ultra unit

Vortex Unit (includes tube, works with the Ultra):

Operates at a 100,000Hz carrier frequency

Can be modulated 1 to 100,000hz with any wave form (square, sine, etc.)

Variable Intensity

Power: 48 watts maximum

Availability: Stock

Cost: $1100

NEW BEAM TUBES

** 3 new models connects to BCX Ultra

1. BT-EFG (Beam Tube- Electric Field Generator)

Generates Plasma discharge and Electric Field

Operating frequency: 1 to 666 Hz.

Wave Form: No intensity variation (squarewave only).

Power: 125 millijoules/pulse (83 watts @ 666 Hz.)

Tube Type: Double-Bubble or Phanatron beam tube

Availability: Now

Cost: $2995

2. BT-PCM (Beam Tube- Plasma Carrier Modulator)

Operates with a 100khz carrier frequency

Operating frequency: 1Hz to 100khz

Wave Form: (square, sine, etc.)Variable Intensity

Power: 96 watts maximum

Tube Type: Double-Bubble or Phanatron beam tube

Availability: Now

Cost: $2100

3. BT-HF EFG (Beam Tube- High Frequency Electric Field Generator)

Generates Plasma discharge and Electric Field Field Field

Operating frequency: 1Hz to 4 MHz

Wave Form: Squarewave only, Variable Intensity

Power: PRELIMINARY-125 microjoules/pulse (412 watts @ 3.30 MHz) Tube Type: Double-Bubble or

Phanatron beam tube

Availability: est.30 days

Cost: TBD

CHOICE of 2 Models of Beam Tubes for the above 3 BT control boxes:

1. BT-PDB (Beam Tube- Plasma Double Bubble)

2. BT-PPH (Beam Tube- Plasma Phanatron)

STANDARD LED WANDS:

Color Wave

nanometrs

Lum Intens.

milcand

Beam

Wdth

degrees

Focal

Plane

inches

Lumens LED Fwd

Volts

LED Fwd

Current

millamps

TTL

Power

milliwatts

Efficiency

Lum/Watt

Red 640 24,000 20 1.7 2.3 1.9 30 342 6.74

Blue 467 21,600 10 2.15 1.33 2.7 30 486 2.73

Green 520 108,00 20 1.7 10.37 3.2 30 576 18.00

1. Wavelength for colored colored LED's ranges from long (infrared), to short

(ultraviolet). White is a mixture of colors centered around a middle (color temperature).

2. Luminous Intensity is the most accurate indicator of LIGHT INTENSITY.

3. Beam width and Focal plane define the distance from the light source where the light

is most even.

4. Luminous flux takes into account the area over which the light at a given intensity is

spread, and is the best representation of the QUANTITY OF LIGHT emitted.

5. Power in watts is a poor representation of the light output. It actually only shows

the electrical consumption of the device. For example, a 100 watt incandescent light bulb

puts out the same amount of light as a 20 watt Compact Fluorescent bulb (CFL).

HIGH POWERED (HP) LED WANDS:

SPECS on the NEW Ultra High Power LED wands:

Ultra High Power LED Wand Model HW530A (Green):

Wavelength 530 nm

Intensity 435 Lumens

Ultra High Power LED Wand Model HW626A (Red):

Wavelength 626 nm

Intensity 255 Lumens

Ultra High Power LED Wand Model HW470A (Blue):

Wavelength 470 nm

Intensity 174 Lumens

Ultra HP LED Wands output roughly 40 times that of the standard Ultra LED wands and pulse at 1mhz, 1.25mhz, and 1.67mhz. The

standard LED wand won't pulse above 100khz.

Frequently Asked Questions

1. Is there a need to run above 4.00 MHz (4,000,000 Hz)? Actually all Rife frequencies including All Original Rife frequencies are

below 3.0 MHz so 3.0 MHz is plenty.

2. Why would I want to get the more powerful stand alone BCX Ultra Beam Tubes? Our BCX Ultra

already includes a wide range of Apparatuses/Electrodes and optional. Our clients have had great success with just the included

Hand-held Ray Tubes & metal apparatuses (ie footplates). However with the stand alone BCX Ultra Beam Tubes (doublebubble/

phanatron tube) can kill off organisms at a faster rate due to the intense power they produce.

3. Why is your included Hand-held Plasma Ray Beam Tubes apparatus better then the metal apparatuses? refer here

4. Do I need to buy a new BCX unit if there any software upgrades or hardware upgrades? Any Software Upgrades, just send in

your unit to get the latest & greatest. Future option will be through your computer. For hardware upgrades in most cases your unit for a

nominal fee can be upgraded, contact us and we can give

5. Does the BCX Ultra have Radio Carrier Wave & Gating Wave? Yes Why do I need to have them? refer here

6. Do I need to buy any additional equipment for the BCX Ultra? No, both Amplifier & Frequency Generator are both built-in to our

BCX Ultra unit (other units such as the GB4000 are separate) AND (4) Apparatuses are included (proprietary Hand Held RayTubes,

metal footplates, metal hand-held cylinders, & pre-gel pads) other units have no included apparatuses or they only have metal

cylinders. We do have additional apparatuses but not required.

7. What happens if your PRE-STORED Programs do not have a frequency or frequencies that I

would like to run? We have 256 slots (manual programs) to save your own frequencies and for each slot

you can save up to 48 frequencies making a total of 12,288 frequencies. You can also combine Pre-Stored

programs and save them to your own custom manual program.

8. What happens if I want to change the settings of a PRE-STORED Program? When you run a prestored

program you have the ability to make any modifications you would like Or just run as is.

WHY BCX ULTRA?

1. Wide Range of Wave Types including our exclusive Square 'Pulse' Wave

2. Runs ALL ORIGINAL RIFE Frequencies. BCX Ultra runs from 1Hz up to 4MHz. NOTE: No need to run above 4MHz, No

Rife Freq used above 3MHz

3. Wide Range of Apparatuses/Electrodes both included and optional (see what is new & upcoming).

4. Our Hand-held Plasma Ray Beam Tubes

5. Any Software Upgrades, just send in your unit to get the latest & greatest. Future option will be through your computer.

6. Radio Carrier Wave & Gating Wave

7. Our proprietary 'Square Pulse Wave' - Pulses a Square Wave. We have found this to more effective then the Standard Square Wave

and better results are being seen with the die off.

8. Amplifier & Frequency Generator are both built-in to our BCX Ultra unit

9. Exciting New Apparatuses coming soon that will connect with the BCX Ultra (see what is new & upcoming).

IMPORTANT INFO & TERMS (BCX ULTRA)

WAVE FORMS: Square wave is for killing pathogens and sine wave is for regeneration and healing. The Ultra

has many other waveforms to choose from for your experimentation. At this time we use the sq. pulse width as the

default because we are getting better results with this modified square wave. Many people have reported this.

CARRIER WAVES: The Ultra has a basic carrier wave that is preset at 100,000 Hz for the glass tubes only. There

are 3 carrier waves to choose from for the rest of the electrodes. You can run a carrier wave from 1-4MHz. Because of

the skin effect we now preset (default) the carrier at 44660Hz. Much research has been done proving that the higher the

frequency, the more the current follows the outside of the body. Thus it is referred to as the skin effect. Research is

underway to determine whether above or below 1 MHz works better.

The Ultra has a carrier frequency so that the audio frequency can piggyback (can be carried) by the RF frequency (the

carrier) causing the frequencies to penetrate deeper and farther. It is a known fact that RF or radio frequencies above

about 200,000 Hertz broadcast very well which is why they are called radio frequencies. Frequencies between 20,000

and 200,000 Hz broadcast to some degree, while frequencies below 20,000 Hz do not broadcast at all. Therefore, we

recommend one of the three RF carriers we provide (1.67, 1.25 or 1,00 MHz) for Carrier wave, and the desired audio

frequency found in the manual for Frequency wave. We are using 44660 Hz for the carrier default at this time because

we are getting good results.

GATING OR ENTRAINMENT: This is what we used to call pulse. The previous unit had a pulse rate of about

2/3’s on and 1/3 off. You can use 3.5 Hz to get this same effect. We now use 56.2 Hz as the default in the Ultra. See

more on gating below.

Abrams who worked with Rife used 3.5-4 Hz for gating. Dr. James Bare, a leader in the field of frequency technology,

recommends the 20-30-40 Hz range for gating. It is generally believed that the higher the frequency the higher the

gating. Rife’s 1939 instrument, which ran in the MHz range, had a 60 cycle gating. What is gating? Gating is another

form of modulation. The Ultra is modulating 2 frequencies when it plays an audio frequency with a carrier (RF)

frequency. In other words, the audio frequency is piggy backed onto a higher frequency. All the time this is happening,

the Ultra introduces gating which creates the blink, blink you see as you play your frequencies. More on Gating and

Entrainment: Entrainment is defined as: “the tendency for two oscillating bodies to lock into phase so that they vibrate

in harmony. It is also defined as a synchronization of two or more rhythmic cycles.” This principle of entrainment is universal in nature.

DUTY CYCLE: The Ultra has a default of 90 percent duty cycle. For many years people ran the standard 50% duty cycle.

It is now known that a 90 % duty cycle exposes microorganisms to the frequency for 80% more time than a 50% duty cycle. Do the math. 90% is 80% greater than 50%.

It is known that the higher the duty cycle, the greater the coordinative resonance. However, experimenters may choose any duty cycle 1-100 using the Ultra. What is duty cycle?

Duty cycle is how long the frequency is on and off when running a frequency.

For example, if running the frequency 100Hz, the frequency is cycling 100 times per second. A 50% duty cycle means that the frequency is on 50 % and off 50% of each second. The 90 % duty cycle means that the frequency is on 90% and off 10% of each second.

During the 90% on, it is cycling at the rate of 100 times a second.

GLASS RAY TUBES: Hold the glass part of the tubes in the hands, under the arms, or in direct contact with the skin on any area of the body.

GLASS TUBES AND FOOT PLATES: Generally the glass tubes are used simultaneously with the footplates.

This gives more frequency power into the body. Some people prefer to use the glass tubes alone.

For a complete information regarding technical product data, ordering information, and support literature, just call our office at 888-874-0944, or contact us. We look forward to hearing from you!

 

Jenna's Neuro-Lyme disease website

Meet Jenna the Author

Sign Up Below to Stay Informed

 


 Jenna's Video Blog 

We respect your email privacy

Boost Your Immune System

 

 

 

LYME FOG
What can you do about it?

Use Colloidal Silver to fight infection, enhance the clarity of your mind,  and heal tissue resulting inthe production of healthy cell regeneration AND, electrical stimulization, a healing modality that has worked for thousands of years!

 

 

 

BUST BIOFILMS! 

with unique enzymes that expose Lyme bacteria to killing agents for more effective treatment:

Lumbrokinase

Nattokinase

Serrapeptase

 

 

May You Be Blessed

Last Updated:

 Home
 Lyme Disease
 History of LD
 Biology of LD
 Symptom List
 Diagnosis
 Treatment
 Mysterious shapes
 Herxheimer
 Medical Debate
 Insurance
 Social Securilty Disability
 Lab 257
 Neuro-Lyme?
 Neuroborreliosis
 Neuropathic Pain
 Neurophsychiatric Lyme
 Research on Neuro-Lyme
 Tulane
 Columbia
 Dr. Coyle at SUNY
 Co-infections
 Protocols
 Dr Lee Cowden
 Marshall Protocol
 Dr. Klinghardt
 Dr. Zhang
 MMS Protocol
 New Salt Protocol
 Buhner Herbal Protocol
 Victoria's Protocol
 HCL Protocol
 The Original Rife Machine
 How Rife Machine Works
 History of Rife
 Before You Buy A Rife Machine
 About Rife Frequencies
 Articles
 Violence and Lyme Disease
 Notes From Dr. Fallon
 Review of Neuroborrelliosis
 Psychological Evaluation of Pediatric, Neurologic Lyme Disease
 Lyme Disease is fastest growing disease
 Balance pH
 Links
 Lyme Disease Resource

 
Pekana Digestive Pack
Pekana Digestive Pack
 We found these the most successful, broad spectrum digestive and intestinal remedies at our Clinic during 30 years of practice. For detoxing, IBS, colitis, Crohn's disease and all sensitive intestinal problems. (Always in conjunction with qualified medical advice.)
CLICK HERE TO ORDER

Fight Neuro-Lyme and Candida while boosting immune system!

 

DESTROY BIOFILM AND SEST FOR BRAIN

These are the best supplements for neuological Lyme disease:

Protection: Resveratrol, Selenium
Repair: Vinpocamine, Ginkgo Biloba
Inflammation: Huperzine, Stephania
Memory: L-acetyl-canetine, Zinc w/copper

 
 
 
salt and apple protocol for neuro-Lyme
 

Himalayan Salt Capsules for Lyme Protocol

 Apple Poly for Lyme Protocol